If you’ve been experimenting with increasing the signal range of your wireless network, you may wonder how to connect two WiFi extenders. Even the very best routers could use some help every once in a while when it comes to connectivity range, and wireless extenders provide that help. So how do you connect two to maximize coverage? Keep reading to find out.
KEY TAKEAWAYS:
- If you are struggling with dead spots or limited connectivity in your home, it is possible to use two range extenders to boost the wireless signal and get a strong signal.
- Make sure each Wi-Fi extender is arranged properly so that each unit can easily communicate with the router.
- Change up the SSID (Service Set Identifier) of each network extender and connect to the router, checking on the signal strength and overall WiFi signal.
Why Connect Two Wi-Fi Extenders
It’s all about range. If you live in a large home or office and are suffering from dead spots or poor Internet connectivity, you have no doubt tried a wireless extender. This helped, to be sure, but if you are still experiencing issues along the furthest reaches of your home, it may be time to invest in a mesh router network system or time to connect two wireless extenders. The former is easier to implement but more expensive, though both options are easier than learning how to enable DHCP on a router.
Insider Tip
This process is much simpler and more efficient by using a mesh network setup, though these are pricier than a second extender.
Connecting a Pair of Wireless Extender
If you really need to maximize Internet access, forgo learning the definition of a NAT on a router. Instead, invest in some wireless extenders and connect them together.
STEP 1
Ensure your wireless network is working to deliver a steady and reliable Internet connection. Make sure the modem is plugged into the router via Ethernet cord and that the router is working up to spec.
STEP 2
Arrange the extenders to maximize connectivity. For best results, make sure the router is in the center of your home so that each wireless extender can easily connect to the device to increase signal range.
STEP 3
Connect each extender to your router, and not to one another. Make sure each extender features a unique Service Set Identifier (SSID), which can be set via software that ships with the extender. If you can’t figure out how to do this, check the instructions.
STEP 4
Test the connection. Once each extender is connected to the router, you should experience a noted uptick in wireless network range. Take some time to test this out by operating devices throughout the home.
F.A.Q.S
How to extend the WiFi range with another router without a cable?
Another router can double as a wireless extender by manipulating the firmware, though Internet speeds may suffer slightly.
How to extend the WiFi range in the house?
You can use a Wi-Fi extender or any number of similar range extenders. Also, you can invest in a mesh router WiFi network for increased wireless access to mobile devices.
How to extend the WiFi range outside?
The same methods hold true outdoors as indoors, though you may experience less success with your average Wi-Fi extender, as signal strength will largely depend on external conditions. For the strongest signal, use a wired connection or stay indoors.
STAT: Many ISPs provide single-band, 802.11n-based wireless routers which fall short in meeting the demand for greater Wi-Fi speed and coverage at home. To resolve this, you can install a Wi-Fi range extender to get that increased speed and expanded wireless network coverage. (source)
REFERENCES:
- https://community.netgear.com/t5/WiFi-Range-Extenders-Nighthawk/Can-you-use-2-wifi-extenders-at-the-same-time/td-p/1071091
- https://community.tp-link.com/en/home/forum/topic/155927
- https://blog.amplifi.com/2017/04/25/ditch-the-wi-fi-extender-why-you-should-get-a-meshpoint-instead/r
- https://www.verizon.com/supportresources/content/dam/verizon/support/consumer/documents/internet/fios-extender-user-guide.pdf
- https://www.linksys.com/us/support-article?articleNum=207542
